Reset

Students' association

Cybertech 2015

Build your robot and come to the competition!

IMPORTANT! Registration is closed for the Classic category.

November 14th, at 14.00, is the first Workshop of Cybertech Classic in the Gym

Introduction


Cybertech is an anual robot competition which is organized by the student's association Reset, with the full Departamento de Automática, Ingeniería Electrónica e Informática Industrial support. Thanks to the Escuela Técnica Superior de Ingenieros Industriales of the Universidad Politécnica de Madrid.

This competition has two categories: Classic and Pro .

In the Classic Category there are two kinds of challenges: maze and linefollower.

In the maze, the goal for the robots is to find the way out from a labyrinth autonomously.

In the linefollower, the robots have to follow a circuit painted on the floor.

The challenge increases as the competition goes on, with more and more complicated mazes and obstacles...

The Pro Category is thought for contestants more skillful, this year there is two challenges: Sumo and Catchball.

In the Sumo, the robots figth each other tryng to immobilize the opponent or take it out of the ring.

'San fermines' will consist on 3 stages:

La ruta de la tapa: In this stage, the robot will have to map a maze, detect the 3 Bars that are in the route of the tapa and then resolve the maze in a second round, going through each bar in a particular order.

The bull run: The contestant robots will race each other to see which of them reaches the finish line first. Each robot must follow a black line, but the different black lines may cross each other. They must hurry if they don’t want to be reached by Robotaurus

Bull leaping: In a bullring, 1vs1, each robot will have to dodge Robotaurus’ charges to survive as long as possible.

Note: The student association RESET advocate the use of robots, instead of bulls, as the main element of entertainment.

Classification


Classic Classification

Position Team
404 Not Found
Frizzy Corp
Compuglobalintermeganet
Los Solfamidas
Termomix Mutante
Planet Express
Star Tech
Tercera Matrícula

Sumo Pro Classification

Position Team
Speedy Botzález
Aetherium
Troncomovil

Sanfermines Pro Classification

Position Team
404 Not Found
Void Loop
Hefesto

Registration and calendar


Registration is closed for the Classic category. You can still join the PRO competition. December 31th is he deadline for both Cybertech PRO categories.

Join Cybertech PRO here: Cybertech 2015 Registration

The calendar for all the workshops, milestones and the competion is here: Cybertech 2015 Calendar

Workshops


First workshop

November 14th

Only one turn: 14.00 at the Gym

Phase 1

14.00 - 15.00: Material and tutors

Note: a videotutorial will be available in this webpage with the contents of the workshop.

Phase 2

15.00 - 16.00 Workkshop 1: Arduino introduction

Because of the space limitations, only students which haven't done 'Fundamentos de electrónica', 'Cybertech' or 'Octubre robótico' will can assist

You can download here the Arduino+Debuggino version: Download Arduino

Second Workshop

November 18th

It is a workshop where we will learn about how to use different kinds of sensors and how to weld with tin

It's going to be two sessions:

Morning's session

12:30 - 14:30 in the E5 classroom

Afternoon's session

15:30 - 17:30 in the E5 classroom

Remember to bring a laptop by each group, your own briefcase and download the following slides:Second Workshop slides

Third Workshop

November 21th

It is a workshop where we will learn about how to use the Arduino Motor Shield.

It's going to be two sessions:

Morning's session

12:30 - 14:30 in the E5 classroom

Afternoon's session

15:30 - 17:30 in the 37 classroom

Remember to bring a laptop by each group, your own briefcase and download the following slides:Third Workshop slides

Fourth Workshop

November 28th

It is a workshop where we will get some advices about how to design and build our robot

It's going to be two sessions:

Morning's session

12:30 - 14:30 in the E5 classroom

Afternoon's session

15:30 - 17:30 in the 37 classroom

Remember to bring a laptop by each group and download the following slides:Fourth Workshop slides

Fifth Workshop

February 20th

It is a workshop where we will learn about the main controllers and how to adjust them

It's going to be two sessions:

Morning's session

12:30 - 14:30 in the 37 classroom

Afternoon's session

15:30 - 17:30 in the 37 classroom

Remember to bring a laptop by each group and download the following slides (updated):Fifth Workshop slides

PCB's Workshop

March 27th

It is a workshop where we will learn how to design our PCB

Morning's session

12:30 - 14:30 in the E4 classroom

Afternoon's session

15:30 - 17:30 in the E4 classroom

You must have installed EagleCAD and FreeRouting; optional EagleUp

  • Tutorial video

Especial thanks to AETEL from the south campus of UPM

Tutors

Tutor
NameemailGroups
Alberto Perezalberto.perez.calleja@gmail.comG6, G29
Adrián Corrala.corral.zapata@gmail.comG31, G51
Alejandro García Generalejandro.ggener@gmail.comG10, G50
Alejandro García Jiménezalemandersen@gmail.comG17, G44
Alejandro Lópeza.lopez.gestoso@gmail.comG20, G34, G46
Alejandro Yunta...G1, G36, G52
Arturo Sanchezsanchez-mayoral@hotmail.comG8, G55
Carmen Vicocvicog@gmail.comG5, G48, G54
Diego Gonzálezdiegomorin8@gmail.comG2, G39
Hua Chenhuapisimo3@gmail.comG9, G18, G53
Ignacio Murgaignaciomurgacastro@hotmail.comG12, G15
Iván Rodríguezroiron.455@gmail.comG7, G33
Javier...G24, G28
Jorge Barrientosjbarry10@gmail.comG13, G41, G47
Juan Morenojuanan52@hotmail.comG2, G11, G23
Judit Martinezjuditmv89@gmail.comG25, G27, G49
Laura Melendolaumel.80@gmail.comG38, 40
Pablo Menendezpablo.m.etsii@gmail.comG26, G30, G45
Raquel Sanchezraquel.sanchez.diaz@alumnos.upm.esG4, G14
Ruben Ciudadruben.ciudad@gmail.com G19, G35, G37
Sergio Matesergiomatecastro@gmail.comG3, G16, G43
Victor Ruanvictor.ruan4@gmail.comG21, G32, G42

Cybertech 2015